3COM OS SW8800 V3.01.32s256rec13 Release Notes Keywords: Version Information, Restrictions, Feature List, Resolved Problems, Software Upgrading Abstract: This release notes describes the V3.01.32s256rec13 release with respect to hardware and software compatibility, released features and functions, software upgrading, and documentation.
3COM OS SW8800 V3.01.
COM OS SW8800 V3.01.
3COM OS SW8800 V3.01.32s256rec13 Release Notes List of Tables Table 1 Version history .............................................................................................................................. 5 Table 2 Compatibility matrix....................................................................................................................... 5 Table 3 Hardware features ......................................................................................................................
3COM OS SW8800 V3.01.32s256rec13 Release Notes Version Information Version Number Version Information: Switch 8800 V3.01.32s256rec13 Note: You can see the version number with the command display version in any view. Please see Note①. Version History Table 1 Version history Version number Last version Release Date Remarks V3.01.32s256rec13 V3.01.32s256rec12 2013-04-24 None V3.01.32s256rec12 V3.01.32s256rec11 2011-03-16 None V3.01.32s256rec11 V3.01.32s256rec07 2010-09-19 None V3.01.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Item Specifications MPU: Version 303 or higher LPU: Version 304 or higher Boot ROM version 3C17548(VPLS)/3C17542(Netstream):Version 303 or higher (Note: Perform the command display version command in any view to view the version information. Please see Note②) Host software 88h03_01_32s256rec13.app (24,151,595 Bytes) iMC EAD 3.60-E6301 + P04 iMC MVM 3.50-F5401 iMC NTA 3.20-F0606 iMC version iMC PLAT 3.20-R2606 + P13 + L15 iMC UAM 3.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Switch 8800 uptime is 0 week, 0 day, 0 hour, 6 minutes 3C17508 6: uptime is 0 week,0 day,0 hour,6 minutes Switch 8800 with 1 MPC755 Processor 512M bytes SDRAM 16384K bytes Flash Memory 512K bytes NVRAM Memory PCB Version : Ver.B BootROM Version : 303 CPLD Version : 000 Software Version : 3C17533 3: ------- Note② 3.01.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Limitation 4 【QOS】In MPLS L3VPN networking, the IP packets, which come from the Egress PE (i.e. the packets with the MPLS tag header removed), cannot map the DSCP value of the IP packet according to EXP value of the MPLS header. Instead, they adopt the DSCP value of the original IP packet. It is suggested that the DSCP value of the IP packet be guaranteed by the initiator.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Limitation 12 【QOS】Do not enable the flow control function on either the 3C17528/3C17532/ 3C17528A board, because none of them support the flow control function. Limitation 13 【QOS】After the priority has been set on the port, upon queue traffic shaping, packet loss may occur during line-speed packet forwarding. Limitation 14 【MSTP】By default, a stp-disabled port broadcasts BPDU packets to all the ports in the VLAN.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Limitation 21 【Multicast】In the case of multicast MSDP trans-domain networking, the static RP (Rendezvous Point) mode should be configured. Otherwise, RP dynamic switchover will make MSDP unable to send the SA (Source Active) messages across the domains. Limitation 22 【Multicast】If the ECMP routes exist on the upstream and downstream switches, the ASSERT mechanism is not supported, in which case the PIM SM is recommended.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Limitation 29 【 Performance 】 In the case of a great number of EBGP neighbors, the MPU memory is recommended to be 1G memory; Otherwise, exception will occur in the system. For example: 1. lots of memory shortage information printed out; 2. the FIB table is inconsistent with the routing table; 3. finally the memory is used up and the system is unavailable.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Limitation 37 【Board】On the 3C17532/3C17528/3C17532A/3C17528A board, an Access or Hybrid untagged port cannot serve for mirroring source port; Otherwise, the mirrored packets may be incorrectly tagged. As a result, some network adapters cannot identify the packets.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Limitation 46 【Upgrade】It is required to load the BootROM upgrade file to the Flash memory before you upgrade the BootROM version of the MPU through BootROM menu. Otherwise, BootROM upgrade file may not be specified during the upgrade process. Limitation 47 【Upgrade】 BootROM upgrade may be failed if the BootROM file name (including path) exceeds 56 characters.
3COM OS SW8800 V3.01.
3COM OS SW8800 V3.01.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Features Link aggregation Description Supports Link Aggregation Control Protocol (LACP). Supports port aggregation, including manual aggregation, dynamic LACP aggregation and static LACP aggregation. Supports trans-board link aggregation. Supports port-based mirroring including trans-board. Mirroring Supports flow mirroring of duplicating packets to the CPU. VLAN Supports IEEE 802.1q-compliant Virtual Local Area Network (VLAN).
3COM OS SW8800 V3.01.32s256rec13 Release Notes Features IP route Description Supports Routing Information Protocol (RIP) v1/v2. Supports Open Shortest Path First (OSPF). Supports Border Gateway Protocol (BGP). Supports Intermediate System-to-Intermediate System intra-domain routing information exchange protocol (IS-IS). Supports OSPF/IS-IS/BGP Graceful Restart (GR). Supports static routes. Supports equivalent routes. Supports policy routes. Supports routing policy.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Features Quality of Service (QoS) Description Supports traffic classification based on port, MAC address, VLAN, IP address, IP priority, TCP/UDP port number, DSCP priority, Type of service (ToS) priority, class of service (CoS) priority, etc. Supports traffic shaping. Supports priority mark/remark. Supports 8 priority queues for each port. Supports traffic monitoring, with granularity of 8 Kbps.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Features Description System maintenance Supports filtering, output and statistics of the alarm/debugging information. Supports the maintenance and diagnosis tools such as Ping and Tracert. Supports Network Quality Analysis (NQA). Supports remote maintenance through Modem dialup and Telnet login. Version Updates Feature Updates Table 5 Feature updates Version number Item Hardware feature updates V3.01.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Version number Item Hardware feature updates V3.01.32s256rec06 Software feature updates Description New Features：none Deleted Features：none New Features：One mirrored analysis port for each chip and OSPF appendix E routes function Deleted Features：none Modified Features none Hardware feature updates V3.01.32s256rec05 Software feature updates New Features：none Deleted Features：none New Features：802.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Version number Item Description corresponding filter condition is satisfied. testcomplete: Delete ARP of the destination IP address when the test fails and the corresponding filter condition is satisfied. Description: Use the delete-arp command to configure the conditions of deleting ARP of the destination IP address. Use the undo delete-arp command to cancel the configured the conditions of deleting ARP of the destination IP address.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Version number Item Description Ipc-path check is enabled. Command 3 Syntax: mpls l2vc reply-to-withdraw undo mpls l2vc reply-to-withdraw View: Remote-peer view Parameters: None Description: Use the mpls l2vc reply-to-withdraw command to enable the device to reply to the withdraw message and send the release message. Use the undo mpls l2vc reply-to-withdraw command to disable the device to reply to the withdraw message.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Version number Item Description [Default value revision] None [Parameter range revision] None V3.01.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Version number Item Description View: System view / Port view Parameters: interface-list: Ethernet port list. Description: Use the dot1x re-authenticate command to enable the 802.1X re-authenticating function. Use the undo dot1x re-authenticate command to cancel configuration. The 802.1X re-authenticating function is disabled by default. Example: # Enable 802.1X re-authenticating function for Ethernet3/1/1~Ethernet3/1/4.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Version number Item Description Command 3 Syntax: Localforwarding undo localforwarding View: VSI view Parameters: None Description: Use the localforwarding command to enable VSI broadcast local-forwarding. Use the undo localforwarding command to disable VSI broadcast local-forwarding. The VSI broadcast local-forwarding is disabled by default. Example: # Disable VSI broadcast local-forwarding.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Version number Item Description Example: # set inbound packet statistics counters for GigabitEthernet2/1/1. <8800> system-view System View: return to User View with Ctrl+Z.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Version number Item Description igmp-snooping host-port vlan { all | vlan-id } undo igmp-snooping host-port vlan { all | vlanid } View: Port view Parameters: all: All VLAN. vlan-id: VLAN ID defined in IEEE802.1Q, ranger from 1 to 4094. Description: Use the igmp-snooping host-port vlan command to enable host-port function on the port. Use the undo igmp-snooping host-port vlan command to cancel the configuration. The host-port function is disabled by default.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Version number Item MIB file New None Modified None New None Modified None Module Description V3.01.32s256rec06 V3.01.32s256rec05 Configuration Changes Configuration Changes in V3.01.32s256rec13 None Configuration Changes in V3.01.32s256rec12 None Configuration Changes in V3.01.32s256rec11 None Operation Changes in V3.01.32s256rec13 None Operation Changes in V3.01.32s256rec12 None Operation Changes in V3.01.
3COM OS SW8800 V3.01.32s256rec13 Release Notes On an Ethernet interface (interface 1), configure multiple traffic-redirect commands that have the same primary next hop and backup next hop. On another Ethernet interface, configure multiple traffic-redirect commands that have the same primary next hop as those traffic-redirect commands configured on interface 1 but have no backup next hop.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Description: If the apply extcommunity and vpn-target commands set the same BGP extended community attribute value, the device prints route anomaly information and the display ip routing-table vpninstance vpn-instance-name verbose and display ip routing-table vpn-instance vpn-instancename commands display inconsistent routing information. HYII007962 First Found-in Version: V3.01.
3COM OS SW8800 V3.01.32s256rec13 Release Notes HYII007729 First Found-in Version: V3.01.32s256rec12 Condition: This symptom might occur if VRRP and MSTP server are enabled. Description: The VRRP slave changes to master when the command that display diagnostic-information is performed. HYII007933 First Found-in Version: V3.01.32s256rec12 Condition: The fault transceiver module was inserted, and accessed. Description: The device will reboot occasionally. HYII007934 First Found-in Version: V3.01.
3COM OS SW8800 V3.01.32s256rec13 Release Notes This problem occurs when the network topology changed frequently in some MPLS MPBGP VPN special environment. Description: The device will reboot possibly. HYII007949 First Found-in Version: V3.01.32s256rec12 Condition: This problem occurs when packets forward and match an aggregation routing. Description: The packets will be trapped to CPU. HYII007952 First Found-in Version: V3.01.
3COM OS SW8800 V3.01.32s256rec13 Release Notes HYII007971 First Found-in Version: V3.01.32s256rec12 Condition: This symptom might occur if the ospf lsa count error in OSPF networks that some devices support DC (Demand Circuit) and some devices do not support DC. Description: OSPF error count ---“LS ACK: duplicate ack” increased continually, There are many logs about LSA retransmit. Resolved Problems in V3.01.32s256rec12 HYII07921 First Found-in Version: V3.01.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Condition: This problem occurs when main board bootrom version is 303 and software version is 1652. Description: It result the CF light is error. HYII07928 First Found-in Version: V3.01.32s256rec11 Condition: The device needs to support pos mplscp negotiation function. Description: The current version does not support pos mplscp negotiation function. HYII07929 First Found-in Version: V3.01.
3COM OS SW8800 V3.01.32s256rec13 Release Notes HYII07894 First Found-in Version: V3.01.32s256rec07 Condition: This problem occurs when the number of ISIS router exceeds 512. Description: The device is in switchover or the main board had been rebooted. HYII07778 First Found-in Version: V3.01.32s256rec07 Condition: The SW8800 device learns many of OSPF routes in the OSPF network, such as 40K OSPF routes.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Description: The current version does not support NQA and ARP collaboration. HYII07676 First Found-in Version: V3.01.32s256rec06 Condition: This problem occurs when the RPR network topology changed frequently. Description: The direct PING possibly failed between the RPR nodes. HYII07677 First Found-in Version: V3.01.32s256rec06 Condition: This problem occurs when the RPR physical port was DOWN/UP.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Condition: This problem occurs when the SW8800 device enable MPLS LDP and configure static LSP. Description: It will possibly cause LDP LSP entry to be wrong. HYII07696 First Found-in Version: V3.01.32s256rec06 Condition: This problem occurs when the SW8800 device configure MPLS OAM application. Description: The MPLS OAM timer was possibly wrong and could not send protocol packets. HYII07685 First Found-in Version: V3.01.
3COM OS SW8800 V3.01.32s256rec13 Release Notes HYII07678 First Found-in Version: V3.01.32s256rec06 Condition: This problem occurs when the good fiber-module are inserted after the fault fiber-module pull out. Description: The port cannot print information of the good fiber-module inserted. HYII07692 First Found-in Version: V3.01.32s256rec06 Condition: This problem occurs when the device enable STP function. Description: The source MAC of STP protocol packets is not the device bridge MAC.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Description: The device will reboot exceptionally. HYII07668 First Found-in Version: V3.01.32s256rec06 Condition: This problem occurs when the device configure multicast VLAN plus. Description: The main board memory lost and is exceptional. HYII07638 First Found-in Version: V3.01.32s256rec06 Condition: This problem occurs when the device configure vlan-vpn application. Description: The device can not transfer BPDU tunnel packet from the zero logical port.
3COM OS SW8800 V3.01.32s256rec13 Release Notes This problem occurs when the OSPF network surging. Description: This will result in OSPF NSSA route surge. HYII07664 First Found-in Version: V3.01.32s256rec06 Condition: This problem occurs when the device has IPC (Inter-process Communication) fault. Description: The device has no IPC fault checking. HYII07636 First Found-in Version: V3.01.32s256rec06 Condition: This problem occurs when we specify the app to boot of board by the command boot-loader.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Condition: This problem occurs when to get the hardware version information of board by SNMP. Description: The SW8800 device will reboot probability. HYII07640 First Found-in Version: V3.01.32s256rec06 Condition: This problem occurs when to display loopback-detection on the SW8800 device. Description: The loopback-detection information only includes the detected port without the VLAN. HYII07650 First Found-in Version: V3.01.
3COM OS SW8800 V3.01.32s256rec13 Release Notes HYII07653 First Found-in Version: V3.01.32s256rec06 Condition: This problem occurs when the CPU appears 0x700 (PROGRAM) exceptions. Description: The SW8800 device won't record the exception information. HYII07651 First Found-in Version: V3.01.32s256rec06 Condition: This problem occurs when the CPU appears exception. Description: It may print "All user interfaces are used" when user telnet to the device. HYII07652 First Found-in Version: V3.01.
3COM OS SW8800 V3.01.32s256rec13 Release Notes The memory value by SNMP is different from that the memory value get by command. HYII07657 First Found-in Version: V3.01.32s256rec06 Condition: The MPLS VPN instance vpn-target is configured. Description: The VPN-Instance's import-list and export-list have only support 20 pieces each and need to support 40 pieces. HYII07643 First Found-in Version: V3.01.
3COM OS SW8800 V3.01.32s256rec13 Release Notes HYII07585 First Found-in Version: V3.01.32s256rec05 Condition: This problem occurs when 802.1X use EAP authentication. Description: The 802.1X re-authentication will fail if having different user name. HYII07633 First Found-in Version: V3.01.32s256rec05 Condition: The SW8800 device needs to support POE DIMM online upgrading function. Description: The current version does not support POE DIMM online upgrading. HYII07599 First Found-in Version: V3.01.
3COM OS SW8800 V3.01.32s256rec13 Release Notes It will print "Maximum lsp reached" for not enough DS-BLK memory. HYII07581 First Found-in Version: V3.01.32s256rec05 Condition: The MPLS OAM protection group switchovers after configured. Description: The MPLS L3VPN and MPLS VLL will fail. HYII07607 First Found-in Version: V3.01.32s256rec05 Condition: The SW8800 device needs to completely support OSPF appendix E routes with same prefix and different mask.
3COM OS SW8800 V3.01.32s256rec13 Release Notes This problem occurs when the boards remove from the frame. Description: The “VFS RPC SyncCall” information in logfile is some mistake. HYII07597 First Found-in Version: V3.01.32s256rec05 Condition: In a network with 3C17526 boards used and STP enabled. Description: The CPU sending packets are sent from 3C17526 ports which were blocked by STP. HYII07605 First Found-in Version: V3.01.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Condition: This problem occurs when the trunk port was added into SubVLAN and the related board was rebooted. Description: The SuperVLAN virtual MAC will be deleted wrong on other boards. HYII07593 First Found-in Version: V3.01.32s256rec05 Condition: The SW8800 device needs to support one mirrored analysis port for each packet processor chip. Description: The current version only supports one mirrored analysis port for each board.
3COM OS SW8800 V3.01.32s256rec13 Release Notes The ingress LSP cannot be established for LDP memory leakage. HYII07583 First Found-in Version: V3.01.32s256rec05 Condition: This problem occurs when the power of SW8800 device was suddenly closed. Description: The current version has no record for the power close. Resolved Problems in V3.01.32s256rec05 HYII07567 First Found-in Version: V3.01.32s256rec04 Condition: The SW8800 device needs to support 802.1X re-authenticating function.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Condition: The SW8800 device receives the Network LSAs with same lsa-id from other devices. Description: The OSPF processing on SW8800 device differs from the OSPF standard. HYII07546 First Found-in Version: V3.01.32s256rec04 Condition: This problem occurs when the OSPF neighbor re-established in broadcast and NBMA OSPF networking. Description: The remote address in log information is wrong. HYII07537 First Found-in Version: V3.01.
3COM OS SW8800 V3.01.32s256rec13 Release Notes HYII07561 First Found-in Version: V3.01.32s256rec04 Condition: This problem occurs when the C-type board configures traffic-redirect to the port on same chip. Description: The ARP could learn on the wrong port of other board. HYII07549 First Found-in Version: V3.01.32s256rec04 Condition: The SW8800 device needs to support the board CPU testing function. Description: The current version does not support the board CPU testing function.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Description: The RPR port does not support traffic-redirect to the port, link-aggregation and smart-link. HYII07534 First Found-in Version: V3.01.32s256rec04 Condition: The SW8800 device needs to support the QOS queue-statistics function. Description: The current version does not support the QOS queue-statistics function. HYII07529 First Found-in Version: V3.01.32s256rec04 Condition: The SW8800 device needs to support the multicast host-Port function.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Condition: This problem occurs when the portal authentication was configured on the vlan-interface. Description: The number of portal authentication network is less than four. HYII07521 First Found-in Version: V3.01.32s256rec04 Condition: This problem occurs when the SolarWinds V9.1 was used to manage the SW8800 device. Description: The SW8800 device cannot be managed by SolarWinds V9.1 used SNMPv3. HYII07521 First Found-in Version: V3.01.
3COM OS SW8800 V3.01.32s256rec13 Release Notes software upgrading, SW800 series routing switches introduce FTP module to implement fast and flexible software upgrade and file download. The version offers a simpler upgrade way. Users can upgrade a switch by using command line and rebooting the switch. Please confirm the current version number before upgrading. If the version number of BootROM is 100 or lower, remote online upgrading is not supported.
3COM OS SW8800 V3.01.32s256rec13 Release Notes ftp: 24151595 bytes sent in 324.68Seconds 76.82Kbytes/sec. Using the switch as a FTP Client The local computer runs as the FTP Server. Logon the FTP server in user view from the switch and get the program files to the switch: dir Directory of flash:/ 0 -rw- 91 Mar 17 2007 10:35:03 ls.pwd 1 drw- - Mar 06 2007 10:15:26 hafile 2 -rw- 14865 Mar 17 2007 10:44:06 config.cfg 15621 KB total (15607 KB free) ftp 192.168.0.2 Trying ...
3COM OS SW8800 V3.01.32s256rec13 Release Notes 1. If the MPU has no CF card, upgrade the BootROM first and then remove part of program files in the Flash memory (it is recommended to remove some unused host program files). After that, FTP the new host program to the Flash memory of the switch, and then finish the host program upgrade. 2. If the MPU has CF card, FTP the host program and BootROM to the CF card of the switch, and then finish the upgrade for the BootROM and host program.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Upgrade L3PLUS BootROM The BootROM upgrading method for the L3PLUS board is the same as that for other LPUs. boot bootrom LSBLMCUF02303.APP slot 5 This will update BootRom file on board 5. Continue? [Y/N] y Board 5 is upgrading BOOTROM, please wait... Frame 0 IO Board 5 upgrade BOOTROM succeeded! L3PLUS boards include three types: 3C17542, 3C17548. Before upgrade, you need to download the program file LSBLMCUF02303.APP.
3COM OS SW8800 V3.01.32s256rec13 Release Notes If there is not enough space in the Flash memory Delete some file in CF card, then put the 88h03_01_32s256rec13.app into CF card, then upgrade the host program of the MPU with 88h03_01_32s256rec13.app. Reboot the Switch Reboot the switch to make the new host program take effect. (Be sure to save configuration referring to 8.3 Upgrade Configuration Files before rebooting the switch, as it may cause lose of configurations).
3COM OS SW8800 V3.01.32s256rec13 Release Notes Choose <5> in the main menu of MPU BootROM and enter the Ethernet submenu: ETHERNET SUBMENU 1. Download file to SDRAM through ethernet interface and boot 2. Download file to Flash through ethernet interface 3. Download file to CF card through ethernet interface 4. Modify ethernet interface boot parameter 0.
3COM OS SW8800 V3.01.32s256rec13 Release Notes boot device : fei unit number : 0 processor number : 0 host name : 8800 file name : LSBSRP1N01303.APP inet on ethernet (e) : 192.168.0.90 host inet (h) : 192.168.0.91 user (u) : 8800 ftp password (pw) : 123 flags (f) : 0x0 Prepare for loading....OK Loading....done Free flash Space : 15862784 bytes Writing Flash................................................................................... .......................................Done B.
3COM OS SW8800 V3.01.32s256rec13 Release Notes SERIAL SUBMENU 1. Download file to SDRAM through serial interface and boot 2. Download file to Flash through serial interface 3. Download file to CF card through serial interface 4. Modify serial interface boot parameter 0. Return to main menu Enter your choice(0-4): 2 Please Select File . XMODEM downloading ...CC download successfully! Free flash Space : 15862784 bytes Writing Flash.........................................................................
3COM OS SW8800 V3.01.32s256rec13 Release Notes Update Bootrom..........................done Reboot MPU Reboot the MPU after loading, the new BootROM comes into effect. MAIN MENU 1. Boot with default mode 2. Boot from Flash 3. Boot from CF card 4. Enter serial submenu 5. Enter ethernet submenu 6. Modify Flash description area 7. Modify bootrom password 0.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Download BootROM program files Figure 1 LPU structure The serial port and network interface of a PC are connected to the serial port and network interface of the LPU respectively. Note that the baud rate of LPU network interface should be set as 115200bps and wire sequence of LPU serial port is introduced in Appendix. Press Ctrl+B in the main menu of LPU BootROM: Press Ctrl+B to stop auto-boot...
3COM OS SW8800 V3.01.32s256rec13 Release Notes target name (tn) : target Would you like modifying network param?(y/n):y '.' = clear field; '-' = go to previous field; ^D = quit boot device : fei2 processor number : 0 host name : host file name : lmcu.vfs LSBLMCUA01304.APP inet on ethernet (e) : 10.11.113.1 inet on backplane (b): host inet (h) : 10.11.113.
3COM OS SW8800 V3.01.32s256rec13 Release Notes [VxWorks Boot]: 0: vxWorks image from net port 1: vxWorks image from serial port 2: Reboot Board Please input your download choice: 2 Before upgrade, you must check the version number of the current BootROM. In the process of upgrading BootROM, it is not allowed to power off the switch or the board being upgraded; otherwise the board will fail to reboot.
3COM OS SW8800 V3.01.32s256rec13 Release Notes 9600bps and that the serial port wire is the same as that for MPU Console. Press Ctrl+B in the main menu of BootROM: Press Ctrl+B to enter Boot Menu... 2 MAIN MENU 1. Boot from SRPU 2. Boot from FTP 3. Boot from flash 4. Load program to flash 5. Modify boot parameter 6. Write FA EEPROM 7. Erase flash 0. Reboot Enter “U” to upgrade BootROM. Note that the following parameters are fixed: the IP address of FTP servers must be 192.168.0.
3COM OS SW8800 V3.01.32s256rec13 Release Notes flags (f) : 0x66 Prepare for loading...OK Loading....done FileSize = 0x80000 Update 512k Bootrom... Erase flash...OK! Write flash...OK! Verify...OK! Update successfully! Reboot the L3PLUS board Reboot the L3PLUS board after loading. The new BootROM comes into effect. MAIN MENU 1. Boot from SRPU 2. Boot from FTP 3. Boot from flash 4. Load program to flash 5. Modify boot parameter 6. Write FA EEPROM 7. Erase flash 0.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Change booting mode and booting file Choose <6> in the main menu and set booting mode and booting file: MAIN MENU 1. Boot with default mode 2. Boot from Flash 3. Boot from CF card 4. Enter serial submenu 5. Enter ethernet submenu 6. Modify Flash description area 7. Modify bootrom password 0. Reboot Enter your choice(0-7): 6 Please input '0' or '1' ('0':Boot from Flash, '1':Boot from CF card) BootDev = 0 FlashFileName = mpu.APP 88h03_01_32s256rec13.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Free Space : 360736 bytes Choose <6> to display the list of files in the CF card: Enter your choice(0-8): 6 Initialize CF card...done No. File Size Date Time File Name ================================================================= 1. 265320 2004-12-22 14:03:46 mpubtout.app Free CF card space : 255823872 bytes. Reboot the MPU Reboot the MPU. The new host program comes into effect.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Configuration is saved to flash memory successfully. Upgrading for 3C17526 1) Miura version supports port group concept, and the QACL configuration for 3C17526 boards are made based on port group.
3COM OS SW8800 V3.01.32s256rec13 Release Notes Pin 3 of DB9 connector is connected to pin 2 of 2×5 double-rank receptacle. Pin 5 of DB9 connector is connected to pin 5 of 2×5 double-rank receptacle. Other pins are not in use. Copyright © 2008, 3Com Corporation. All Rights Reserved. 3Com and the 3Com logo are registered trademarks of 3Com Corporation or one of its subsidiaries.
