3COM_OS_SW8800_V3.01.32s256rec13_Release_Notes

3COM OS SW8800 V3.01.32s256rec13 Release Notes
April 25, 2013 Page 21 of 70
Version number Item Description
corresponding filter condition is satisfied.
testcomplete: Delete ARP of the destination IP
address when the test fails and the corresponding
filter condition is satisfied.
Description:
Use the delete-arp command to configure the
conditions of deleting ARP of the destination IP
address.
Use the undo delete-arp command to cancel the
configured the conditions of deleting ARP of the
destination IP address.
By default, no deleting ARP of the destination IP
address.
Example:
# Configure the condition of deleting ARP of the
destination IP address as probefailure.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] nqa-agent enable
[Sysname] nqa administrator icmp
[Sysname-nqa-administrator-icmp] delete-arp
probefailure
Command 2
Syntax:
ipc-path check { enable | disable }
View:
System view
Parameters:
enable: enabled ipc-path check.
disable: disabled ipc-path check.
Description:
Use the ipc-path check enable command to
enable ipc-path check. Use the ipc-path check
disable command to disable ipc-path check.
By default, the device disabled ipc-path check
function.
Example:
# Enable ipc-path check function.
<Sysname> system-view
[Sysname] ipc-path check enable