3COM_OS_SW8800_V3.01.32s256rec13_Release_Notes

3COM OS SW8800 V3.01.32s256rec13 Release Notes
April 25, 2013 Page 29 of 70
On an Ethernet interface (interface 1), configure multiple traffic-redirect commands that have the
same primary next hop and backup next hop.
On another Ethernet interface, configure multiple traffic-redirect commands that have the same
primary next hop as those traffic-redirect commands configured on interface 1 but have no backup
next hop.
Description:
When the primary next hop specified for traffic-redirect is unreachable, traffic switchover to the
backup next hop takes a long time (30 seconds at most).
HSD109575
First Found-in Version: V3.01.32s256rec12
Condition:
This symptom occurs if the MAC address of the peer device contains 00 in any byte.
Description:
SW8800 fails to establish a DLDP neighbor relationship with a peer device.
HYII007964
First Found-in Version: V3.01.32s256rec12
Condition:
This symptom occurs if the SW8800 has a NAT or VPN service card.
Description:
After an SW8800 reboots, static aggregate ARP entries might get lost.
HYII007968
First Found-in Version: V3.01.32s256rec12
Condition:
This symptom can be seen when a MIB walk operation is performed to get the password information.
Description:
A MIB walk operation can get the password information.
HYII007967
First Found-in Version: V3.01.32s256rec12
Condition:
This symptom occurs if the apply extcommunity and vpn-target commands set the same BGP
extended community attribute value.