3COM_OS_SW8800_V3.01.32s256rec13_Release_Notes

3COM OS SW8800 V3.01.32s256rec13 Release Notes
April 25, 2013 Page 30 of 70
Description:
If the apply extcommunity and vpn-target commands set the same BGP extended community
attribute value, the device prints route anomaly information and the display ip routing-table vpn-
instance vpn-instance-name verbose and display ip routing-table vpn-instance vpn-instance-
name commands display inconsistent routing information.
HYII007962
First Found-in Version: V3.01.32s256rec12
Condition:
This symptom might occur if the switch has a VPN service card.
Description:
After a reboot, multicast ARP entries might get lost.
HYII007966
First Found-in Version: V3.01.32s256rec12
Condition:
This symptom might occur if a faulty fiber module is installed on the GP24 card.
Description:
The fiber modules on the last eight ports of the GP24 card do not light and the fiber ports are down.
HYII007969
First Found-in Version: V3.01.32s256rec12
Condition:
This symptom might occur if a log server is deployed on the switch.
Description:
An SNMP walk on port entity MIB might result in a device reboot .
HYII007960
First Found-in Version: V3.01.32s256rec12
Condition:
This symptom might occur if the SW8800 acts as a Layer 3 device and each route on it only have one
next hop.
Description:
The Layer 3 portal authentication function does not take effect.