3COM_OS_SW8800_V3.01.32s256rec13_Release_Notes

3COM OS SW8800 V3.01.32s256rec13 Release Notes
April 25, 2013 Page 35 of 70
HYII07894
First Found-in Version: V3.01.32s256rec07
Condition:
This problem occurs when the number of ISIS router exceeds 512.
Description:
The device is in switchover or the main board had been rebooted.
HYII07778
First Found-in Version: V3.01.32s256rec07
Condition:
The SW8800 device learns many of OSPF routes in the OSPF network, such as 40K OSPF routes.
Description:
Delete OSPF configuration and then re-configure, this will result in rebooting exceptionally.
HYII07776
First Found-in Version: V3.01.32s256rec07
Condition:
The SW8800 device has establish OSPF neighbors with peer which configure network large segment.
Description:
It will result in SW8800 device rebooting exceptionally.
Resolved Problems in V3.01.32s256rec07
HYII07691
First Found-in Version: V3.01.32s256rec06
Condition:
This problem occurs when the 2.5G/1G fiber-module is used on the SW8800 device.
Description:
The transceiver type of 2.5G/1G fiber-module is displayed wrong.
HYII07695
First Found-in Version: V3.01.32s256rec06
Condition:
The SW8800 device needs to support NQA (Network Quality Analyzer) and ARP collaboration.