3COM_OS_SW8800_V3.01.32s256rec13_Release_Notes

3COM OS SW8800 V3.01.32s256rec13 Release Notes
April 25, 2013 Page 37 of 70
Condition:
This problem occurs when the SW8800 device enable MPLS LDP and configure static LSP.
Description:
It will possibly cause LDP LSP entry to be wrong.
HYII07696
First Found-in Version: V3.01.32s256rec06
Condition:
This problem occurs when the SW8800 device configure MPLS OAM application.
Description:
The MPLS OAM timer was possibly wrong and could not send protocol packets.
HYII07685
First Found-in Version: V3.01.32s256rec06
Condition:
This problem occurs when the SW8800 device was connected with the UT-Starcom device.
Description:
The port cannot UP possibly after the port is UP/DOWN repeatedly.
HYII07689
First Found-in Version: V3.01.32s256rec06
Condition:
This problem occurs when two 3COM JDSU fiber-modules are inserted on the 2-port/4-port 10G
board.
Description:
The 2-port/4-port 10G board cannot be restarting.
HYII07693
First Found-in Version: V3.01.32s256rec06
Condition:
This problem occurs when the Opnext TRF2001EN-GA000 XFP are used on the 4-port 10G board.
Description:
The transceiver type of the Opnext TRF2001EN-GA000 XFP is displayed changing.