3COM_OS_SW8800_V3.01.32s256rec13_Release_Notes

3COM OS SW8800 V3.01.32s256rec13 Release Notes
April 25, 2013 Page 45 of 70
It will print "Maximum lsp reached" for not enough DS-BLK memory.
HYII07581
First Found-in Version: V3.01.32s256rec05
Condition:
The MPLS OAM protection group switchovers after configured.
Description:
The MPLS L3VPN and MPLS VLL will fail.
HYII07607
First Found-in Version: V3.01.32s256rec05
Condition:
The SW8800 device needs to completely support OSPF appendix E routes with same prefix and
different mask.
Description:
The current version only partly supports OSPF appendix E routes.
HYII07607
First Found-in Version: V3.01.32s256rec05
Condition:
The SW8800 device configures the "vlink-peer" in the OSPF network.
Description:
The SW8800 device will reboot exceptionally.
HYII07580
First Found-in Version: V3.01.32s256rec05
Condition:
This problem occurs when the SW8800 device run OSPF route protocol.
Description:
There is some OSPF debug information in logfile.
HYII07602
First Found-in Version: V3.01.32s256rec05
Condition: