3COM_OS_SW8800_V3.01.32s256rec13_Release_Notes

3COM OS SW8800 V3.01.32s256rec13 Release Notes
April 25, 2013 Page 52 of 70
Condition:
This problem occurs when the portal authentication was configured on the vlan-interface.
Description:
The number of portal authentication network is less than four.
HYII07521
First Found-in Version: V3.01.32s256rec04
Condition:
This problem occurs when the SolarWinds V9.1 was used to manage the SW8800 device.
Description:
The SW8800 device cannot be managed by SolarWinds V9.1 used SNMPv3.
HYII07521
First Found-in Version: V3.01.32s256rec04
Condition:
This problem occurs when the telnet user performed display diagnostic-information.
Description:
Partly diagnostic information does not print out.
Related Documentation
For the most up-to-date version of documentation:
1) Go to http://www.3Com.com/downloads
2) Select Documentation for Type of File and select Product Category.
Software Upgrading
Upgrade software only when necessary and follow the guidance of a technical support engineer. Due
to some reasons, you have to upgrade switch software while the switch is working. In the upgrading
process, the switch cannot be powered off; otherwise, unexpected results will occur.
SW8800 series routing switches software is originally upgraded through serial port. However, this
mode is slow and time-consuming, it needs to be on site, and only one device at a time. To facilitate