3COM_OS_SW8800_V3.01.32s256rec13_Release_Notes

3COM OS SW8800 V3.01.32s256rec13 Release Notes
April 25, 2013 Page 59 of 70
boot device : fei
unit number : 0
processor number : 0
host name : 8800
file name : LSBSRP1N01303.APP
inet on ethernet (e) : 192.168.0.90
host inet (h) : 192.168.0.91
user (u) : 8800
ftp password (pw) : 123
flags (f) : 0x0
Prepare for loading....OK
Loading....done
Free flash Space : 15862784 bytes
Writing
Flash...................................................................................
.......................................Done
B. Download BootROM program files through serial port
Choose <4> in the main menu of MPU BootROM and enter the serial port submenu:
SERIAL SUBMENU
1. Download file to SDRAM through serial interface and boot
2. Download file to Flash through serial interface
3. Download file to CF card through serial interface
4. Modify serial interface boot parameter
0. Return to main menu
To set the baud rate of the serial port, choose <4> and enter the following menu to select the
corresponding rate:
Enter your choice(0-4): 4
1: 9600(default)
2: 19200
3: 38400
4: 57600
5: 115200
please select an appropriate baudrate:
Enter your choice(1-5): 5
BaudRate is 115200 bps. Please change the terminal's speed to 115200 bps
Return to the serial port submenu after the setting. Choose <2> to download the program file to Flash
memory. Select the program file to be downloaded and XMODEM protocol on HyperTerminal. Then
begin to download the program file: