3COM_OS_SW8800_V3.01.32s256rec13_Release_Notes

3COM OS SW8800 V3.01.32s256rec13 Release Notes

April 25, 2013 Page 65 of 70

9600bps and that the serial port wire is the same as that for MPU Console. Press Ctrl+B in the main

menu of BootROM:

Press Ctrl+B to enter Boot Menu... 2

MAIN MENU

1. Boot from SRPU

2. Boot from FTP

3. Boot from flash

4. Load program to flash

5. Modify boot parameter

6. Write FA EEPROM

7. Erase flash

0. Reboot

Enter “U” to upgrade BootROM. Note that the following parameters are fixed: the IP address of FTP

servers must be 192.168.0.91, user name must be “boot”, and password “123”. The BootROM file is

LSBLMCUF02303.APP:

boot device : fei

unit number : 2

processor number : 0

host name : l3plus

file name : LSBLMCUF02303.APP

inet on ethernet (e) : 192.168.0.90

host inet (h) : 192.168.0.91

user (u) : boot

ftp password (pw) : 123

flags (f) : 0x66

Confirm the above parameters and then press <Enter> to upgrade the BootROM.

Enter your choice(0-6): U

Target Name: vxTarget

Attaching network interface fei2... done.

Attached TCP/IP interface to fei unit 2

NFS client support not included.