3COM_OS_SW8800_V3.01.32s256rec13_Release_Notes

3COM OS SW8800 V3.01.32s256rec13 Release Notes
April 25, 2013 Page 68 of 70
Free Space : 360736 bytes
Choose <6> to display the list of files in the CF card:
Enter your choice(0-8): 6
Initialize CF card...done
No. File Size Date Time File Name
=================================================================
1. 265320 2004-12-22 14:03:46 mpubtout.app
Free CF card space : 255823872 bytes.
Reboot the MPU
Reboot the MPU. The new host program comes into effect.
Upgrade Configuration File
Upgrading from Jalpa
Confirm the current version. If the current version is Jalpa, such as V3.01.10rec01, you should save
the configuration first, and then rename the file name from *.txt to *.cfg, to keep a backup file for
configuration restoration in case of upgrading failure.
<SW8800> save
This will save the configuration in the flash memory.
The switch configurations will be written to flash.
Are you sure?[Y/N]y
Now saving current configuration to flash memory.
Please wait for a while...
Save current configuration to flash memory successfully.
<SW8800> rename config.txt config.cfg
Rename flash:/config.txt to flash:/config.cfg ?[Y/N]:y
% Renamed file flash:/config.txt to flash:/config.cfg
Upgrading from Miura
Confirm the current version. If the current version is Miura, such as V3.01.20rec01, you may only
need to save the configuration by using the following commands:
<SW8800> save
The configuration will be written to the device.
Are you sure?[Y/N]y
Now saving current configuration to the device.
Saving configuration flash:/config.cfg. Please wait...