3Com Switch 4200G Configuration Guide

ABOUT THIS GUIDE
This guide provides information about configuring your network using the
commands supported on the 3Com
®
Switch 4200-G Family.
The descriptions in this guide applies to the Switch 4200-G.
Organization of the
Manual
The Switch 4200 Family Configuration Guide consists of the following chapters:
■ CLI Overview—Provides an introduction to the CLI interface.
■ Logging In—Provides information on the different ways to log into the switch.
■ Configuration File System Management—Details the Configuration File
System Management.
■ Address Management—Details hoe to configure the switch on which the
Address Manage (AM) feature is enabled.
■ VLAN Operation—Details how to configure VLANs.
■ DHCP—Details Dynamic Host Configuration Protocol.
■ Voice-VLAN—Details configuration information to create Voice-VLAN.
■ GVRP Configuration—Details GARP VLAN Registration Protocol
configuration.
■ Port Operation—Details how to configure Ethernet ports.
■ Link Aggregation—Details how to aggregating several ports together
■ Port Isolation—Details how to configure ports to be controlled on Layer 2.
■ DLDP—Details overview and fundamentals for Device Link Detection Protocol.
■ MAC Address Table Management—Details MAC address table
configuration.
■ MSTP—Details Multiple spanning tree protocol.
■ 802.1x Configuration—Details how to configure 802.1x.
■ HABP Configuration—Details how to configure HABP
■ AAA &RADIUS—Details AAA and RADIUS Configuration.
■ EAD—Details Endpoint Admission Defense Configuration.
■ Centralized MAC address authentication—Details Centralized MAC
address authentication configuration.
■ ARP—Details Address Resolution Protocol table configuration.
■ DHCP—Details Dynamic Host Configuration Protocol.
■ ACL Configuration—Details how to configure QoS/ACL..