3Com Switch 4200G Configuration Guide

2 ABOUT THIS GUIDE
■ QoS—Details Quality of Service.
■ Mirroring—Details how to configure Mirroring.
■ IGMP Snooping—Details Internet Group Management Protocol Snooping
■ Multicast Protocol—Details how to configure multicast protocols.
■ Clustering—Details Clustering Configuration.
■ SNMP—Details Simple Network Management Protocol Configuration.
■ RMON—Details Remote Monitoring Configuration.
■ NTP—Details Network time protocol.
■ SSH—Details Secure Shell authentication.
■ File System Management—Details how to configure the file system
management.
■ FTP and TFTP—Details how to configure the FTP and TFTP protocols.
■ Information Center—Details how to configure the Information Center
■ BootROM and Host Software—Details how to how to load BootROM and
host software to a switch
■ Basic System Configuration—Details how to how to configure a basic
system.
■ IP Performance Configuration—Details how to configure routing protocols
■ Network Protocol Operation—Details how to configure network protocols
■ Network Connectivity Tests—Details how to perform a connectivity test.
■ Device Management—Details how to manage devices.
■ VLAN-VPN—Details configuration information to create VLAN-VPNs.
■ DHCP Relay—Details Dynamic Host Configuration Protocol relay
configuration.
■ Static Route—Details Static Route Configuration.
■ UDP Helper—Details UDP Configuration.
Intended Readership The manual is intended for the following readers:
■ Network administrators
■ Network engineers
■ Users who are familiar with the basics of networking
Conventions This manual uses the following conventions:
Table 1 Icons
Icon Notice Type Description
Information note Information that describes important features or instructions.
Caution Information that alerts you to potential loss of data or
potential damage to an application, system, or device.