3Com Switch 4200G Configuration Guide

Command Level/Command View 3
■ System view
■ Ethernet port view
■ VLAN view
■ VLAN interface view
■ LoopBack interface view
■ Local user view
■ User interface view
■ FTP client view
■ SFTP client view
■ MST region view
■ Cluster view
■ Public key view
■ Public key editing view
■ Basic ACL view
■ Advanced ACL view
■ Layer 2 ACL view
■ RADIUS scheme view
■ ISP domain view
Table 4 lists information about CLI views (including the operations you can performed
in these views, how to enter these views, and so on).
Tab le 4 CLI views
View
Available
operation
Prompt
example
Enter method Quit method
User view Display operation
status and
statistical
information
<S4200G> Enter user view once
logging into the
switch.
Execute the quit
command in user
view to log out of
the switch.
System view Configure system
parameters
[4200G] Execute the
system-view
command in user
view.
Execute the quit or
return command
to return to user
view.
Ethernet
port view
Configure Ethernet
port parameters
[4200G-GigabitEt
hernet1/0/1]
Execute the interface
gigabitethernet
1/0/1 command in
system view.
Execute the quit
command to
return to system
view.
Execute the return
command to
return to user
view.
[4200G-TenGiga
bitEthernet1/1/1]
Execute the interface
tengigabitethernet
1/1/1 command in
system view.