3Com Switch 4200G Configuration Guide

4 CHAPTER 1: CLI OVERVIEW
VLAN view Configure VLAN
parameters
[4200G-Vlan1] Execute the vlan 1
command in system
view.
Execute the quit
command to
return to system
view.
Execute the return
command to
return to user
view.
VLAN
interface
view
Configure IP
interface
parameters for
VLANs and
aggregated VLANs
[4200G-Vlan-inte
rface1]
Execute the interface
vlan-interface 1
command in system
view.
Execute the quit
command to
return to system
view.
Execute the return
command to
return to user
view.
LoopBack
interface
view
Configure
LoopBack interface
parameters
[4200G-LoopBac
k0]
Execute the interface
loopback 0
command in system
view
Execute the quit
command to
return to system
view.
Execute the return
command to
return to user
view.
Local user
view
Configure local
user parameters
[4200G-luser-use
r1]
Execute the
local-user user1
command in system
view.
Execute the quit
command to
return to system
view.
Execute the return
command to
return to user
view.
User
interface
view
Configure user
interface
parameters
[4200G-ui0] Execute the
user-interface 0
command in system
view.
Execute the quit
command to
return to system
view.
Execute the return
command to
return to user
view.
FTP client
view
Configure FTP
client parameters
[ ftp] Execute the ftp
command in user
view.
Execute the quit
command to
return to user
view.
SFTP client
view
Configure SFTP
client parameters
<sftp-client> Execute the sftp
10.1.1.1 command in
system view.
Execute the quit
command to
return to user
view.
MST region
view
Configure MST
region parameters
[4200G-mst-regi
on]
Execute the stp
region-configuratio
n command in system
view.
Execute the quit
command to
return to system
view.
Execute the return
command to
return to user
view.
Tab le 4 CLI views (Continued)
View
Available
operation
Prompt
example
Enter method Quit method