3Com Switch 4200G Configuration Guide

10 CHAPTER 2: LOGGING INTO AN ETHERNET SWITCH
Common User Interface
Configuration
CAUTION:
■ The auto-execute command command may cause you unable to perform
common configuration in the user interface, so use it with caution.
■ Before executing the auto-execute command command and save your
configuration, make sure you can log into the switch in other modes and cancel
the configuration.
Table 10 Common user interface configuration
Operation Command Description
Lock the current user
interface
lock Optional
Execute this command in user view.
A user interface is not locked by
default.
Specify to send messages
to all user interfaces/a
specified user interface
send { all | number | type
number }
Optional
Execute this command in user view.
Disconnect a specified user
interface
free user-interface [ type ]
number
Optional
Execute this command in user view.
Enter system view system-view —
Enter user interface view user-interface [ type ]
first-number [ last-number ]
—
Set the command that is
automatically executed
when a user logs into the
user interface
auto-execute command
text
Optional
By default, no command is
automatically executed when a user
logs into a user interface.
Display the information
about the current user
interface/all user interfaces
display users [ all ] You can execute this command in
any view.
Display the physical
attributes and
configuration of the
current/a specified user
interface
display user-interface [
type number | number ]
You can execute this command in
any view.