3Com Switch 4200G Configuration Guide

Member Device Configuration 271
Configuring
Internal-External
Interaction
Member Device
Configuration
Member device configuration involves:
■ Enabling NDP globally and for specific ports
■ Enabling NTDP globally and for specific ports
■ Enabling the cluster function
■ Specifying the cluster FTP/TFTP server
Enabling NDP Globally
and for Specific Ports
Enabling NTDP Globally
and for Specific Ports
Table 242 Configure internal-external interaction
Operation Command Description
Enter system view system-view
Enter cluster view cluster Required
Configure an FTP server
for the cluster
ftp-server ip-address Optional
Configure a TFTP server
for the cluster
tftp-server ip-address Optional
Configure a log host
for the cluster
logging-host ip-address Optional
Configure an SNMP
host for the cluster
snmp-host ip-address Optional
Table 243 Enable NDP globally and for specific ports
Operation Command Description
Enter system view system-view —
Enable NDP globally ndp enable Required
Enable NDP for
specified ports
ndp enable interface port-list Optional
Enter Ethernet port
view
interface interface-type
interface-number
—
Enable NDP for the port ndp enable Required
Table 244 Enable NTDP globally and for specific ports
Operation Command Description
Enter system view system-view —
Enable system NTDP ntdp enable Required
Enter Ethernet port
view
interface interface-type
interface-number
—
Enable NTDP for the
port
ntdp enable Required