3Com Switch 4200G Configuration Guide

HGMP V2 Configuration Example 273
HGMP V2
Configuration
Example
Network requirements
Three switches form a cluster, in which:
■ The management device is an S4200G series switch.
■ The rest are member devices.
The S4200G series switch operates as the management device of the cluster. Other
detailed information about the cluster is as follows.
■ The two member devices are connected to GigabitEthernet1/0/2 and
GigabitEthernet1/0/3 ports of the management device.
■ The management device is connected to the external network through its
GigabitEthernet1/0/1 port.
■ GigabitEthernet1/0/1 port of the management device belongs to VLAN2, whose
interface IP address is 163.172.55.1.
■ All the devices in the cluster use the same FTP server and TFTP server.
■ The FTP server and TFTP server share one IP address: 63.172.55.1.
■ The SNMP site and log host share one IP address: 69.172.55.4.
Display state and
statistics information
about a cluster
display cluster Optional
This command can be executed in
any view.
Display the information
about the candidate
devices of a cluster
display cluster candidates [
mac-address H-H-H | verbose ]
Optional
This command can be executed in
any view.
Display the information
about the cluster
members
display cluster members [
member-number | verbose ]
Optional
This command can be executed in
any view.
Clear the NDP statistics
on a port
reset ndp statistics [ interface
port-list ]
Table 247 Display and maintain cluster configurations (Continued)
Operation Command Remark