3Com Switch 4200G Configuration Guide

276 CHAPTER 32: CLUSTER CONFIGURATION
d Establish a connection with the cluster FTP server.
<aaa_1.S4200G> ftp cluster
e Download the file named aaa.txt from the cluster TFTP server.
<aaa_1.S4200G> tftp cluster get aaa.txt
f Upload the file named bbb.txt to the cluster TFTP server.
<aaa_1.S4200G> tftp cluster put bbb.txt
Upon the completion of the above configurations, you can execute the cluster
switch-to {member-number | mac-address H-H-H } command on the management
device to switch to member device view to maintain and manage a member device.
You can then execute the cluster switch-to administrator command to resume the
management device view.
You can also reboot a member device by executing the reboot member
{ member-number | mac-address H-H-H } [ eraseflash ] command on the
management device. For detailed information about these configurations, refer to the
preceding description in this chapter.
After the above configuration, you can check cluster member log and SNMP trap
messages through the SNMP host.