3Com Switch 4200G Configuration Guide

280 CHAPTER 33: SNMP CONFIGURATION
Set a
community
name and
access
authority
Direct
configura
tion
Set a
community
name
snmp-agent community
{ read | write }
community-name [ acl
acl-number | mib-view
view-name ]
Required
■ Direct configuration for
SNMP V1 and SNMP
V2C is based on
community name.
■ Indirect configuration.
The added user is equal
to the community
name for SNMPV1 and
SNMPV2C.
■ You can choose either
of them as needed.
Indirect
configura
tion
Set an
SNMP
group
snmp-agent group { v1 |
v2c } group-name [
read-view read-view ] [
write-view write-view ] [
notify-view notify-view ] [
acl acl-number ]
Add a new
user for an
SNMP
group
snmp-agent usm-user { v1 |
v2c } user-name group-name
[ acl acl-number ]
Set the maximum size of SNMP
packets that the Agent can
send/receive
snmp-agent packet
max-size max-size
Optional
By default, it is 1,500
bytes.
Set the device engine ID snmp-agent local-engineid
engineid
Optional
By default, the device
engine ID is "Enterprise
Number + device
information".
Create or update the view
information
snmp-agent mib-view
{ included | excluded }
view-name oid-tree
Optional
By default, the view name
is ViewDefault and OID is
1.
Table 250 Configure SNMP basic functions (SNMP V3)
Operation Command Description
Enter system view system-view —
Enable SNMP Agent snmp-agent Required
By default, SNMP Agent is
disabled.
Set system information snmp-agent sys-info
{ contact sys-contact |
location sys-location |
version { { v1 | v2c | v3 }* |
all } }
Optional
By default, the contact
information for system
maintenance is "R&D
Beijing, 3Com.", the
system location is "Beijing
China", and the SNMP
version is SNMP V3.
Set an SNMP group snmp-agent group v3
group-name [
authentication | privacy ] [
read-view read-view ] [
write-view write-view ] [
notify-view notify-view ] [
acl acl-number ]
Required
Add a new user for an SNMP group snmp-agent usm-user v3
user-name group-name [
authentication-mode
{ md5 | sha } auth-password
[ privacy-mode des56
priv-password ] ] [ acl
acl-number ]
Required
Table 249 Configure SNMP basic functions for SNMP V1 and SNMP V2C (Continued)
Operation Command Description