3Com Switch 4200G Configuration Guide

16 CHAPTER 3: LOGGING IN THROUGH THE CONSOLE PORT
Configure
the Console
port
Set the baud
rate
speed speed-value Optional
The default baud rate of an AUX
port (also the Console port) is
9,600 bps.
Set the check
mode
parity { even | mark |
none | odd | space }
Optional
By default, the check mode of a
Console port is set to none, that
is, no check bit.
Set the stop
bits
stopbits { 1 | 1.5 | 2 } Optional
The stop bits of a Console port is 1.
Set the data
bits
databits { 7 | 8} Optional
The default data bits of a Console
port is 8.
Configure the command level
available to users logging into
the user interface
user privilege level level Optional
By default, commands of level 3
are available to users logging into
the AUX user interface.
Make terminal services
available
shell Optional
By default, terminal services are
available in all user interfaces.
Set the maximum number of
lines the screen can contain
screen-length
screen-length
Optional
By default, the screen can contain
up to 24 lines.
You can use the screen-length 0
command to disable the function
to display information in pages.
Set the history command
buffer size
history-command
max-size value
Optional
The default history command
buffer size is 10. That is, a history
command buffer can store up to
10 commands by default.
Set the timeout time for the
user interface
idle-timeout minutes [
seconds ]
Optional
The default timeout time of a user
interface is 10 minutes.
With the timeout time being 10
minutes, the connection to a user
interface is terminated if no
operation is performed in the user
interface within 10 minutes.
You can use the idle-timeout 0
command to disable the timeout
function.
Table 14 Console port login configuration with the authentication mode being none
Operation Command Description