3Com Switch 4200G Configuration Guide

318 CHAPTER 36: SSH TERMINAL SERVICES
SFTP Server
Configuration
The following sections describe SFTP server configuration tasks:
■ Configuring service type for an SSH user
■ Enabling the SFTP server
■ Setting connection timeout time
Configuring service type for an SSH user
Enabling the SFTP server
Setting connection timeout time
After you set the timeout time for the SFTP user connection, the system will
automatically release the connection when the time is up.
Table 271 Configure service type for an SSH user
Operation Command Remarks
Enter system view system-view -
Configure service type for
an SSH user
ssh user username
service-type { stelnet | sftp |
all }
Optional
By default, the SSH service type is
stelnet.
Table 272 Enable the SFTP server
Operation Command Remarks
Enter system view system-view -
Enable the SFTP server sftp server enable Required
By default, the SFTP server is not
enabled.
Table 273 Set connection timeout time
Operation Command Remarks
Enter system view system-view
Set timeout time for the SFTP user
connection
sftp timeout
timeout-value
Required
By default, the connection
timeout time is 10 minutes.