3Com Switch 4200G Configuration Guide

SFTP Service 321
Displaying help information
You can display help information about a command, such as syntax and parameters.
SFTP Configuration
Example
Network requirements
As shown in Figure 103,
■ An SSH connection is present between Switch A and Switch B.
■ Switch B serves as an SFTP server, with IP address 10.111.27.91.
■ Switch A serves as an SFTP client.
■ An SSH user name abc with password hello is created.
Network diagram
Figure 103 Network diagram for SFTP configuration
Configuration procedure
1 Configure Switch B (SFTP server)
a Enable the SFTP server.
[4200G] sftp server enable
b Specify SFTP service for SSH user abc.
[4200G] ssh user abc service-type sftp
2 Configure Switch A (SFTP client)
a Establish a connection to the remote SFTP server and enter SFTP client view.
[4200G] sftp 10.111.27.91
Table 279 Display help information about SFTP client commands
Operation Command Remarks
Enter system view system-view -
Enter SFTP client view sftp { host-ip | host-name } -
Display help information about
SFTP client commands
help [ command-name ] Optional
PC
IP address ： 10.111.27.91
SFTP Client
Switch B
SFTP Server
Switch A
PC
IP address ： 10.111.27.91
SFTP Client
Switch B
SFTP Server
Switch A