3Com Switch 4200G Configuration Guide

Console Port Login Configuration with Authentication Mode Being Scheme 21
Console Port Login
Configuration with
Authentication Mode
Being Scheme
Configuration Procedure
Table 18 Console port login configuration with authentication mode being scheme
Operation Command Description
Enter system view system-view —
Configure
the
authentic
ation
mode
Enter the
default ISP
domain view
domain system Optional
By default, the local AAA scheme is
applied. If you specify to apply the local
AAA scheme, you need to perform the
configuration concerning local user as
well.
If you specify to apply an existing
scheme by providing the
radius-scheme-name argument, you
need to perform the following
configuration as well:
■ Perform AAA&RADIUS
configuration on the switch. (Refer
to “AAA&RADIUS Configuration”
for more.)
■ Configure the user name and
password accordingly on the AAA
server. (Refer to the user manual of
AAA server.)
Specify the
AAA scheme
to be applied
to the domain
scheme { local |
radius-scheme
radius-scheme-name [
local ] | none }
Quit to system
view
quit
Create a local user (Enter
local user view.)
local-user user-name Required
No local user exists by default.
Set the authentication
password for the local user
password { simple |
cipher } password
Required
Specify the service type for
AUX users
service-type terminal [
level level ]
Required
Quit to system view quit —
Enter AUX user interface
view
user-interface aux 0 —
Configure to authenticate
users locally or remotely
authentication-mode
scheme
Required
The specified AAA scheme determines
whether to authenticate users locally or
remotely.
Users are authenticated locally by
default.