3Com Switch 4200G Configuration Guide

348 CHAPTER 39: INFORMATION CENTER
Perform the following configuration in user view.
Enabling Information
Output to the Log Buffer
Table 304 lists the related configurations on the switch.
To view debug information of specific modules, you need to set the information type
as debug in the info-center source command, and enable debugging on
corresponding modules with the debugging command as well.
Enabling Information
Output to the Trap
Buffer
Table 305 lists the related configurations on the switch.
Table 303 Enable debug/log/trap terminal display
Operation Command Description
Enable the
debug/log/trap
terminal display
function
terminal monitor Optional
By default, this function is enabled for
console user.
Enable debugging
terminal display
terminal debugging Optional
By default, debugging terminal display is
disabled for terminal users.
Enable logging
terminal display
terminal logging Optional
By default, logging terminal display is
enabled for console users.
Enable trapping
terminal display
terminal trapping Optional
By default, trapping terminal display is
enabled for terminal users.
Table 304 Enable information output to the log buffer
Operation Command Description
Enter system view system-view —
Enable the information
center
info-center enable Optional
By default, the information center is
enabled.
Enable information
output to the log
buffer
info-center logbuffer [ channel
{ channel-number |
channel-name } | size buffersize ]
Optional
By default, the switch outputs
information to the log buffer, which
can holds up to 512 items by
default.
Define an information
source
info-center source { modu-name
| default } channel
{ channel-number |
channel-name } [ { log | trap |
debug } * { level severity | state
state } *]
Required
Set the format of time
stamp
info-center timestamp { log |
trap | debugging } { boot | date
| none }
Optional
This is to set the time stamp format
for log/debug/trap information
output.
This determines how the time
stamp is presented to users.
Table 305 Enable information output to the trap buffer
Operation Command Description
Enter system view system-view —
Enable the information
center
info-center enable Optional
By default, the information center is
enabled.