3Com Switch 4200G Configuration Guide

Local Software Loading 357
Figure 113 Connect and disconnect buttons
The new baud rate takes effect only after you disconnect and reconnect the terminal
emulation program.
6 Press <Enter> to start downloading the program. The system displays the following
information:
Now please start transfer file with XMODEM protocol.
If you want to exit, Press <Ctrl+X>.
Loading …CCCCCCCCCC
7 Choose [ Transfer/Send File] in the HyperTerminal’s window, and in the following
pop-up dialog box click <Browse>, select the software you need to download, and
set the protocol to XMODEM.
Figure 114 Send file dialog box
8 Click <Send>. The system displays the following page.