3Com Switch 4200G Configuration Guide

Remote Software Loading 363
After the above operations, the BootROM and host software loading is completed.
Pay attention to the following:
■ The loading of host software takes effect only after you restart the switch with the
reboot command.
■ If the space of the Flash memory is not enough, you can delete the useless files in
the Flash memory before software downloading.
■ No power-down is permitted during software loading.
Remote Loading Using
TFTP
The remote loading using TFTP is similar to that using FTP. The only difference is that
TFTP is used instead off FTP to load software to the switch, and the switch can only
act as a TFTP client.