3Com Switch 4200G Configuration Guide

366 CHAPTER 41: Basic System Configuration and Debugging
Perform the following configuration in user view.
Setting the Summer
Time
This configuration task is to set the name, time range (start time and end time), and
time offset of the summer timer. The operation here saves you from manually adjust
the system time.
■ When the system reaches the specified start time, it automatically adds the
specified offset to the current time, so as to toggle the system time to the summer
time.
■ When the system reaches the specified end time, it automatically subtracts the
specified offset from the current time, so as to toggle the summer time to normal
system time.
Perform the following configuration in user view.
Setting the CLI
Language Mode
Perform the following configuration in user view.T
Returning from Current
View to Lower Level
View
Perform the following operation in system view or a view higher than system view.
Returning from Current
View to User View
Perform the following operation in any view.
Table 310 Set the local time zone
Operation Command Description
Set the local time zone clock timezone zone-name { add |
minus } HH:MM:SS
Optional
By default, it is the UTC
time zone.
Table 311 Set the summer time
Operation Command Description
Set the name and time
range of the summer
time
clock summer-time zone_name { one-off
| repeating } start-time start-date end-time
end-date offset-time
Optional
Table 312 Set the CLI language mode
Operation Command Description
Set the CLI language
mode
language-mode { chinese | english } Optional
By default, the command
line interface (CLI)
language mode is
English.
Table 313 Return from current view to lower level view
Operation Command Description
Return from current
view to lower level view
quit This operation will result
in exiting the system if
current view is user view.
Table 314 Return from current view to user view
Operation Command Description
Return from current
view to user view
return The composite key
<Ctrl+Z> has the same
effect with the return
command.