3Com Switch 4200G Configuration Guide

Introduction to the Newly Added Cluster Functions 387
Synchronizing User
Name and Password
User Name and Password Synchronization of Web users simplifies user configuration.
With this function employed, the configuration performed on the master device is
synchronized to all the member devices in the cluster. These configurations are mainly
used for WEB users to log into a cluster.
Configuration prerequisites
■ NDP and NTDP configurations are performed on the related cluster devices.
■ The cluster is created and enabled. That is, you can manage cluster members
through the master device.
Configuration procedure
Notes:
Perform the operations listed in Table 334 in cluster view on the master device. The
configuration can only be synchronized to the member devices in the white list only.
The configuration remains valid on a member device even if it quits the cluster or is
removed from the white list.
Configuration example
# Configure a web users.
[chwn_0.S4200G-cluster]cluster-loca www password simple 12345678
Member 1 succeeded in the web-user configuration.
Member 2 succeeded in the web-user configuration.
Finish to synchronize the command.
# Display the current configuration on the master switch (Configuration
resulted from the command is reserved below).
[chwn_0.S4200G-cluster]display current-configuration
#
local-user www
password simple 12345678
service-type telnet
level 2
#
cluster
ip-pool 168.192.0.1 255.255.255.0
build chwn
tftp-server 1.1.1.66
snmp-host 1.1.1.66
cluster-local-user www password simple 12345678
#
snmp-agent
snmp-agent local-engineid 800007DB000FE22405626877
snmp-agent sys-info version all
snmp-agent target-host trap address udp-domain 1.1.1.66 params
securityname clu
ster
undo snmp-agent trap enable standard
Table 334 Synchronize SNMP community name
Operation Command Description
Enter system view system-view -
Enter cluster view cluster -
Configure a Web user cluster-local-user username
passward { cipher | simple }
passwardstring
Required