3Com Switch 4200G Configuration Guide

Displaying and Debugging a Cluster 389
Configuration procedure
Displaying and
Debugging a Cluster
After the above-mentioned configuration, you can use the display command or the
tracemac command in any view to view the cluster operating information, so as to
verify configuration result.
Use the reset command in user view to clear the NDP statistics.
Table 335 Configure enhanced cluster functions
Operation Command Description
Enter system view system-view -
Enter cluster view cluster -
Configure an FTP Server
for the cluster
ftp-server ip-address Required
Confirm the current
topology of the cluster
and save it as a
reference topology file
topology accept { all [
save-to local-flash ] |
mac-address mac-address |
member-id member-id }
Optional
Save the reference
topology file to the local
Flash
topology save-to local-flash Optional
Restore the local
topology file to the
reference topology file
topology restore-from
local-flash
Optional
Remove a specified
cluster member device
from the cluster
delete-member member-id [
to-black-list ]
Optional
Add the device with the
specified MAC address
to the black list
black-list add-mac
mac-address
Optional
Remove the device with
the specified MAC
address from the black
list
black-list delete-mac {
mac-address | all }
Optional
Table 336 Display and debug a cluster
Operation Command
Display cluster members display cluster members [ member-num |
verbose ]
Display the MAC addresses, names, and the
corresponding ports of the devices whose MAC
addresses are within that of the current device and
the device with specified MAC address
tracemac by-mac mac-address vlan vlan-id
[nondp]
Display the MAC addresses, names, and the
corresponding ports of the devices whose IP
addresses are within that of the current device and
the device with specified IP address
tracemac by-ip ip-address [nondp]
Display the standard topology view of the cluster display cluster base-topology [
mac-address mac-address | member-id
member-number ]
Display the current blacklist of the cluster display cluster black-list
Display the current topology view or the topology
path between two points
display cluster current-topology [
mac-address mac-address [ to-mac-address
mac-address ] | member-id member-number
[ to-member-id member-number ] ]