3Com Switch 7750 Configuration Guide Guide

24 CHAPTER 1: CLI OVERVIEW
Loopback
interface view
Configure
Loopback
interface
parameters
[SW7750-LoopBa
ck0]
Execute the
interface
loopback 0
command in
system view
Execute the quit
command to
return to system
view.
Execute the
return command
to return to user
view.
Local user view
Configure local
user parameters
[SW7750-luser-u
ser1]
Execute the
local-user user1
command in
system view.
Execute the quit
command to
return to system
view.
Execute the
return command
to return to user
view.
User interface
view
Configure user
interface
parameters
[SW7750-ui0]
Execute the
user-interface 0
command in
system view.
Execute the quit
command to
return to system
view.
Execute the
return command
to return to user
view.
FTP client view
Configure FTP
client parameters
[ftp]
Execute the ftp
command in user
view.
Execute the quit
command to
return to user
view.
SFTP client view
Configure SFTP
client parameters
<sftp-client>
Execute the sftp
10.1.1.1
command in
system view.
Execute the quit
command to
return to user
view.
DHCP address
pool view
Configure DHCP
address pool
parameters
[SW7750-dhcp-p
ool-1]
Execute the dhcp
server ip-pool 1
command in
system view.
Execute the quit
command to
return to system
view.
Execute the
return command
to return to user
view.
MST region view
Configure MST
region
parameters
[SW7750-mst-re
gion]
Execute the stp
region-configur
ation command
in system view.
Execute the quit
command to
return to system
view.
Execute the
return command
to return to user
view.
Table 4 CLI views
View
Available
operation
Prompt
example
Enter method Quit method