3Com Switch 7750 Configuration Guide Guide

26 CHAPTER 1: CLI OVERVIEW
OSPF view
Configure OSPF
protocol
parameters
[SW7750-ospf-1]
Execute the ospf
command in
system view
Execute the quit
command to
return to system
view.
Execute the
return command
to return to user
view.
OSPF area view
Configure OSPF
area parameters
[SW7750-ospf-1-
area-0.0.0.1]
Execute the area
1 command in
OSPF view
Execute the quit
command to
return to OSPF
view.
Execute the
return command
to return to user
view.
BGP view
Configure
parameters for
the (border
gateway
protocol) BGP
protocol
[SW7750-bgp]
Execute the bgp
100 command in
system view
Execute the quit
command to
return to system
view.
Execute the
return command
to return to user
view.
BGP IPv4 family
multicast view
Configure
parameters for
BGP IPv4 family
multicast
[SW7750-bgp-af-
mul]
Execute the
ipv4-family
multicast
command in BGP
view.
Execute the quit
command to
return to system
view.
Execute the
return command
to return to user
view.
IS-IS view
Configure IS-IS
parameters
[SW7750-isis]
Execute the isis
command in
system view.
Execute the quit
command to
return to system
view.
Execute the
return command
to return to user
view.
ES-IS view
Configure
parameters for
the ES-IS
protocol
[SW7750-esis]
Execute the esis
command in
system view.
Execute the quit
command to
return to system
view.
Execute the
return command
to return to user
view.
Table 4 CLI views
View
Available
operation
Prompt
example
Enter method Quit method