3Com Switch 7750 Configuration Guide Guide

28 CHAPTER 1: CLI OVERVIEW
CLI Features
Online Help CLI provides two types of online help: complete online help and partial online
help. They assist you with your configuration.
Complete online help
Enter a "?" character in any view on your terminal to display all the commands
available in the view and their brief descriptions. The following takes user view as
an example.
<SW7750> ?
User view commands:
QinQ view
Create QinQ
instances and
configure
parameters for
QinQ
[SW7750-Gigabit
Ethernet4/0/1-vid
-1000]
Execute the
vlan-vpn vid
1000 uplink
Ethernet 1/0/5
untagged
command in
Ethernet port
view.
Execute the quit
command to
return to system
view.
Execute the
return command
to return to user
view.
RADIUS scheme
view
Configure
RADIUS
parameters
[SW7750-radius-
1]
Execute the
radius scheme 1
command in
system view.
Execute the quit
command to
return to system
view.
Execute the
return command
to return to user
view.
HWTACACS
scheme view
Configure
parameters for
the HWTACACS
protocol
[SW7750-hwtaca
cs-1]
Execute the
hwtacacs
scheme 1
command in
system view.
Execute the quit
command to
return to system
view.
Execute the
return command
to return to user
view.
ISP domain view
Configure
parameters for
an ISP domain
[SW7750-isp-aab
bcc.net]
Execute the
domain
aabbcc.net
command in
system view.
Execute the quit
command to
return to system
view.
Execute the
return command
to return to user
view.
PoE profile view
Configure PoE
profile
parameters
[SW7750
-poe-profile-test]
Execute the
poe-profile test
command in
system view.
Execute the quit
command to
return to system
view.
Execute the
return command
to return to user
view.
Table 4 CLI views
View
Available
operation
Prompt
example
Enter method Quit method