3Com Switch 7750 Configuration Guide Guide

34 CHAPTER 2: LOGGING INTO AN ETHERNET SWITCH
Common User Interface
Configuration
c
CAUTION: The auto-execute command command may cause you unable to
perform common configuration in the user interface, so use it with caution.
Before executing the auto-execute command command and save your
configuration, make sure you can log into the switch in other modes and cancel
the configuration.
Tabl e 10 Common user interface configuration
Operation Command Description
Lock the current user interface lock
Optional
Execute this command in user
view.
A user interface is not locked
by default.
Specify to send messages to
all user interfaces/a specified
user interface
send { all | number | type
number }
Optional
Execute this command in user
view.
Disconnect a specified user
interface
free user-interface [ type ]
number
Optional
Execute this command in user
view.
Enter system view system-view -
Enter user interface view
user-interface [ type ]
first-number [ last-number ]
-
Set the command that is
automatically executed when
a user logs into the user
interface
auto-execute command text
Optional
By default, no command is
automatically executed when
a user logs into a user
interface.
Display the information about
the current user interface/all
user interfaces
display users [ all ]
Optional
These two commands can be
executed in any view.
Display the physical attributes
and configuration of the
current/a specified user
interface
display user-interface [ type
number | number ]