3Com Switch 7750 Configuration Guide Guide

Console Port Login Configuration with Authentication Mode Being None 39
n
Changes of the authentication mode of Console port login will not take effect
unless you quit the command-line interface and then enter it again.
Console Port Login
Configuration with
Authentication Mode
Being None
Configuration Procedure
Scheme
Specify to perform
local authentication or
RADIUS
authentication
AAA configuration
specifies whether to
perform local
authentication or
RADIUS
authentication
Optional
Local authentication is
performed by default.
Refer to the
AAA&RADIUS&HWTACAC
S&EAD module for more.
Configure user name
and password
Configure user names
and passwords for
local/RADIUS users
Required
■ The user name and
password of a local user
are configured on the
switch.
■ The user name and
password of a RADIUS
user are configured on
the RADIUS server. Refer
to user manual of
RADIUS server for more.
Manage AUX users
Set service type for
AUX users
Required
Perform common
configuration
Perform common
configuration for
Console port login
Optional
Refer to “Common
Configuration” for more.
Table 13 Console port login configurations for different authentication modes
Authentication
mode
Console port login configuration Remarks
Table 14 Console port login configuration with the authentication mode being none
Operation Command Description
Enter system view system-view -
Enter AUX user interface view user-interface aux 0 -
Configure not to authenticate users
authentication-mode
none
Required
By default, users logging
in through the Console
port are not
authenticated.