3Com Switch 7750 Configuration Guide Guide

IGMP Snooping Configuration Example 395
IGMP Snooping
Configuration
Example
Configure IGMP
Snooping on a switch
Network requirements
Connect the router port on the switch to the router, and other non-router ports
which belong to VLAN 10 to user PCs. Enable IGMP Snooping on the switch.
Network diagram
Figure 93 Network diagram for IGMP Snooping configuration
Configuration procedure
# Enable IGMP Snooping in system view.
<SW7750> system-view
[SW7750] igmp-snooping enable
# Enable IGMP Snooping on VLAN 10.
[SW7750] vlan 10
[SW7750-vlan10] igmp-snooping enable
Configure Multicast
VLAN
Network requirements
Table 317 lists all the devices in the network. Assume that port type configuration,
VLAN division configuration, and IP address configuration for the interface are
completed.
Internet
Multicast
Switch
Router