3Com Switch 7750 Configuration Guide Guide

40 CHAPTER 3: LOGGING IN THROUGH THE CONSOLE PORT
Configure the
Console port
Set the baud rate speed speed-value
Optional
The default baud rate of
an AUX port (also the
Console port) is 9,600
bps.
Set the check
mode
parity { even | mark |
none | odd | space }
Optional
By default, the check
mode of a Console port
is set to none, that is, no
check bit.
Set the flow
control mode
flow-control {
hardware | none |
software }
Optional
By default, a Console
port does not perform
flow control.
Set the stop bits stopbits { 1 | 1.5 | 2 }
Optional
The stop bits of a
Console port is 1.
Set the data bits databits { 7 | 8 }
Optional
The default data bits of a
Console port is 8.
Configure the command level available
to users logging into the user interface
user privilege level
level
Optional
By default, commands of
level 3 are available to
users logging into the
AUX user interface.
Make terminal services available shell
Optional
By default, terminal
services are available in
all user interfaces.
Set the maximum number of lines the
screen can contain
screen-length
screen-length
Optional
By default, the screen can
contain up to 24 lines.
You can use the
screen-length 0
command to disable the
function to display
information in pages.
Set the history command buffer size
history-command
max-size value
Optional
The default history
command buffer size is
10. That is, a history
command buffer can
store up to 10
commands by default.
Table 14 Console port login configuration with the authentication mode being none
Operation Command Description