3Com Switch 7750 Configuration Guide Guide

Console Port Login Configuration with Authentication Mode Being Password 43
Console Port Login
Configuration with
Authentication Mode
Being Password
Configuration Procedure
Table 16 Console port login configuration with the authentication mode being password
Operation Command Description
Enter system view system-view -
Enter AUX user interface
view
user-interface aux 0 -
Configure to authenticate
users using the local
password
authentication-mode
password
Required
By default, users logging into a switch
through the Console port are not
authenticated; while those logging in
through Modems or Telnet are
authenticated.
Set the local password
set authentication
password { cipher |
simple } password
Required
Configure
the Console
port
Set the baud
rate
speed speed-value
Optional
The default baud rate of an AUX port
(also the Console port) is 9,600 bps.
Set the check
mode
parity { even | mark |
none | odd | space }
Optional
By default, the check mode of a
Console port is set to none, that is, no
check bit.
Set the flow
control mode
flow-control {
hardware | none |
software }
Optional
By default, a Console port does not
perform flow control.
Set the stop
bits
stopbits { 1 | 1.5 | 2 }
Optional
The default stop bits of a Console port
is 1.
Set the data
bits
databits { 7 | 8 }
Optional
The default data bits of a Console port
is 8.
Configure the command
level available to users
logging into the user
interface
user privilege level
level
Optional
By default, commands of level 3 are
available to users logging into the AUX
user interface.
Make terminal services
available to the user
interface
shell
Optional
By default, terminal services are
available in all user interfaces.
Set the maximum number
of lines the screen can
contain
screen-length
screen-length
Optional
By default, the screen can contain up
to 24 lines.
You can use the screen-length 0
command to disable the function to
display information in pages.