3Com Switch 7750 Configuration Guide Guide

446 CHAPTER 45: MSDP CONFIGURATION
■ Basic functions of IP multicast
■ PIM-SM basic functions
■ MSDP basic functions
Configuring Description
Information for MSDP
Peers
You can configure description information for each MSDP peer to manage and
memorize the MSDP peers.
Configuring Anycast RP
Application
If you configure RPs with the same address for two routers in the same PIM-SM
domain, the two routers will be MSDP peers to each other. To prevent failure of
RPF check on SA messages between MSDP peers, you must configure the RP
address to be carried in the SA messages.
n
In Anycast RP application, C-BSR and C-RP must be configured on different devices
or ports.
Configuring an MSDP
Mesh Group
Configure a mesh group name on all the peers that will become members of the
MSDP mesh group so that the peers are fully connected with one another in the
mesh group.
Tabl e 350 Configure description information for an MSDP peer
Operation Command Description
Enter system view system-view -
Enter MSDP view msdp -
Configure description
information for an MSDP peer
peer peer-address
description text
Optional
By default, an MSDP peer has
no description text.
Tabl e 351 Configure anycast RP application
Operation Command Description
Enter system view system-view -
Enter MSDP view msdp -
Create an MSDP peer
connection
peer peer-address
connect-interface
interface-type
interface-number
Required
Configure the RP address to
be carried in SA messages
originating-rp interface-type
interface-number
Required
Tabl e 352 Configure an MSDP mesh group
Operation Command Description
Enter system view system-view -
Enter MSDP view msdp -
Add an MSDP peer to a mesh
group
peer peer-address
mesh-group name
Required
This command must be
configured on all the peers;
therefore, you need to
configure this command for
multiple times.