3Com Switch 7750 Configuration Guide Guide

Console Port Login Configuration with Authentication Mode Being Scheme 49

[SW7750] local-user guest

# Set the authentication password to 1234567890 (in plain text).

[SW7750-luser-guest] password simple 1234567890

# Set the service type of the local user to Terminal, with the available command

level being 2.

[SW7750-luser-guest] service-type terminal level 2

[SW7750-luser-guest] quit

# Enter AUX user interface view.

[SW7750] user-interface aux 0

# Configure to authenticate users logging in through the Console port in the

scheme mode.

[SW7750-ui-aux0] authentication-mode scheme

# Set the baud rate of the Console port to 19,200 bps.

[SW7750-ui-aux0] speed 19200

# Set the maximum number of lines the screen can contain to 30.

[SW7750-ui-aux0] screen-length 30

# Set the maximum number of commands the history command buffer can store

to 20.

[SW7750-ui-aux0] history-command max-size 20

# Set the timeout time of the AUX user interface to 6 minutes.

[SW7750-ui-aux0] idle-timeout 6