3Com Switch 7750 Configuration Guide Guide

AAA Configuration 497
Configuring the
Attributes of an ISP
Domain
c
CAUTION:
■ On the Switch 7750 Family, each access user belongs to an ISP domain. You
can configure up to 16 ISP domains on the switch. When a user logs in, if no
ISP domain name is carried in the user name, the switch assumes that the user
belongs to the default ISP domain.
■ When charging a user, if the system does not find any available accounting
server or fails to communicate with any accounting server, it will not disconnect
the user as long as the accounting optional command has been executed.
■ The self-service server location function must cooperate with a
self-service-supported RADIUS server (such as CAMS). Through self-service,
users can manage and control their accounts or card numbers by themselves. A
server installed with the self-service software is called a self-service server.
n
3Com’s CAMS Server is a service management system used to manage networks
and secure networks and user information. Cooperating with other network
devices (such as switches) in a network, the CAMS Server implements the AAA
(authentication, authorization and accounting) services and rights management.
Table 375 Configure the attributes of an ISP domain
Operation Command Description
Enter system view system-view -
Create an ISP domain or enter
the view of an existing ISP
domain
domain isp-name Required
Activate/deactivate the ISP
domain
state { active | block }
Optional
By default, once an ISP
domain is created, it is in the
active state and all the users
in this domain are allowed to
access the network.
Set the maximum number of
access users that can be
contained in the ISP domain
access-limit { disable |
enable max-user-number }
Optional
After an ISP domain is
created, the number of access
users it can contain is
unlimited by default.
Set the user idle-cut function
idle-cut { disable | enable
minute flow }
Optional
By default, user idle-cut
function is disabled.
Open/close the
accounting-optional switch
accounting optional
Optional
By default, once an ISP
domain is created, the
accounting-optional switch is
closed.
Set the messenger function
messenger time { enable
limit interval | disable }
Optional
By default, the messenger
function is disabled.
Set the self-service server
location function
self-service-url { disable |
enable url-string }
Optional
By default, the self-service
server location function is
disabled.