3Com Switch 7750 Configuration Guide Guide

Mirroring Configuration 657
Configuration example
■ The mirroring source I/O Module resides in slot 3 and all the packets sent or
received on the I/O Module are mirrored.
■ The mirroring destination I/O Module resides in slot 4.
Configuration procedure:
<SW7750> system-view
[SW7750] mirroring-group 1 local
[SW7750] mirroring-group 1 monitor-slot 4
[SW7750] mirroring-group 1 mirroring-slot 3 both
Define the mirroring source
port or mirroring source I/O
Module
mirroring-group group-id
mirroring-port
mirroring-port-list { both |
inbound | outbound }
You must perform one of the
two operations.
The mirroring source I/O
Module can be a distributed
or centralized I/O Module;
however, the mirroring source
ports must be ports on
distributed I/O Modules.
Mirroring source ports can
also be configured in Ethernet
port view. For detailed
information, refer to
“Configuring port mirroring
in Ethernet port view”.
mirroring-group group-id
mirroring-slot slot-number {
inbound | outbound | both }
Display the settings about
mirroring
display mirroring-group {
all | local }
Optional
You can execute the display
command in any view.
Table 519 Configure mirroring to a module
Operation Command Description