3Com Switch 7750 Configuration Guide Guide

62
POE PROFILE CONFIGURATION
Introduction to PoE
Profile
On a large-sized network or a network with mobile users, to help network
administrators to monitor the PoE features of the switch, Switch 7750 Family
Ethernet switches provide the PoE profile features.
Features of PoE profile:
■ Various PoE profiles can be created. PoE policy configurations applicable to
different user groups are stored in the corresponding PoE profiles. These PoE
profiles can be applied to the ports used by the corresponding user groups.
■ When users connect a PD to a PoE-profile-enabled port, the PoE configurations
in the PoE profile will be enabled on the port.
PoE Profile
Configuration Tasks
Table 530 Configure PoE profile
Operation Command Description
Enter system view system-view -
Create a PoE profile
poe-profile
profile-name
Required
Enter PoE profile view while
creating the PoE profile
Configure the
relevant
features in
PoE profile
Enable the PoE feature
on a port
poe enable
Required
The PoE feature on a port is
enabled by default
Configure PoE mode for
Ethernet ports
poe mode {
signal | spare }
Optional
By default, the PoE mode is set
to signal.
Configure the PoE
priority for Ethernet ports
poe priority {
critical | high |
low }
Optional
By default, PoE priority is set
to low.
Configure the maximum
power for Ethernet ports
poe max-power
max-power
Optional
By default, the maximum
power is set to 15,400
milliwatts.
Return to system view. quit -