3Com Switch 7750 Configuration Guide Guide

672 CHAPTER 62: POE PROFILE CONFIGURATION
n
The following rules should be obeyed:
■ A PoE profile is a group of PoE configurations. Multiple PoE features can be set
in a PoE profile. When the apply poe-profile command applies a PoE profile
to a port, some PoE features can be applied successfully while some PoE
configurations in it cannot.
■ When the apply poe-profile command is used to apply a PoE profile to a port,
the PoE profile is applied successfully if one PoE feature in the PoE profile is
applied properly.
■ If one or more features in the PoE profile are not applied properly on a port, the
switch prompts explicitly which PoE features in the PoE profile are not applied
properly on which ports.
■ The display current-configuration command can be used to query which
PoE profiles are applied to a port. However, the command cannot be used to
query which PoE features in a PoE profiles are applied successfully.
Displaying PoE Profile
Configuration
After the above configuration, execute the display command in any view to see
the running status of the PoE profile. You can verify the configurations by viewing
the information.
PoE Profile
Configuration
Example
Network requirements
Ethernent1/0/1 through Ethernet1/0/10 of the Switch 7757 are used by users of
group A, who have the following requirements:
■ The PoE function can be enabled on all ports.
■ Signal cables are used to supply power.
Apply the
existing PoE
profile to the
specified
Ethernet port
System view
apply poe-profile
profile-name
interface
interface-type
interface-number [
to interface-type
interface-number ]
Required
Users can decide whether to
configure the settings in
system view or port view
In
Ethernet
port
view:
Enter Ethernet
port view
interface
interface-type
interface-number
Apply the
existing PoE
profile to the
port
apply poe-profile
profile-name
Table 530 Configure PoE profile
Operation Command Description
Tabl e 531 Display the PoE profile configuration
Configuration Command Description
Display the detailed
information about the PoE
profiles created on the switch
display poe-profile {
all-profile | interface
interface-type
interface-number | name
profile-name }
The display command can be
executed in any view