3Com Switch 7750 Configuration Guide Guide

Configuring SNMP Basic Functions 681
Configuring SNMP
Basic Functions
The configuration of SNMP V3 configuration is different from that of SNMP V1
and SNMP V2C, therefore SNMP basic function configurations for different
versions are introduced respectively. For specific configurations, refer to
Table 536
and Table 537.
Private MIB
DHCP MIB
DHCP MIB
QACL MIB
ADBM MIB
IGMP Snooping MIB
RSTP MIB
VLAN MIB
Device management
Interface management
-
QACL MIB -
ADBM MIB -
RSTP MIB -
VLAN MIB -
Device management -
Interface management -
Table 535 Common MIBs
MIB attribute MIB content References
Table 536 Configure SNMP basic functions for SNMP V1 and SNMP V2C
Operation Command Description
Enter system view system-view -
Enable SNMP Agent snmp-agent
Optional
By default, SNMP
Agent is disabled
To enable SNMP
Agent, you can
execute this
command or those
commands used to
configure SNMP
Agent features
Set system information
snmp-agent
sys-info { contact
sys-contact | location
sys-location | version
{ { v1 | v2c | v3 }* | all
} }
Required
By default, the
contact information
for system
maintenance is
"Hangzhou
3Com-3Com Tech.
Co.,Ltd.", the system
location is "Beijing
China", and the
SNMP version is
SNMP V3