3Com Switch 7750 Configuration Guide Guide

70 CHAPTER 5: LOGGING IN USING MODEM
Figure 17 Set the telephone number
Figure 18 Call the modem
5 Provide the password when prompted. If the password is correct, the prompt (such
as <SW7750>) appears. You can then configure or manage the switch. You can
also enter the character ? at anytime for help. Refer to the related modules in the
command manual for detailed configuration commands.
n
If you perform no AUX user-related configuration on the switch, the commands of
level 3 are available to modem users. Refer to the CLI module for information
about command level.
Modem Attributes
Configuration
You can configure the Modem-related parameters.
Configuration
Prerequisites
■ You have configured the login mode for users on the switch.
■ Network connection for Modem dial-up configuration has been established.