3Com Switch 7750 Configuration Guide Guide

Local Software Loading 783
Step 5: Click the <Disconnect> button to disconnect the HyperTerminal from the
switch and then click the <Connect> button to reconnect the HyperTerminal to
the switch, as shown in
Figure 202.
Figure 202 Connect and disconnect buttons
n
The new baud rate takes effect only after you disconnect and reconnect the
HyperTerminal program.
Step 6: Press <Enter> to start downloading the program. The system displays the
following information:
Now please start transfer file with XMODEM protocol.
If you want to exit, Press <Ctrl+X>.
Loading ...CCCCCCCCCC
Step 7: Choose [Transfer/Send File] in the HyperTerminal’s window, and click
<Browse> in pop-up dialog box, as shown in
Figure 203. Select the software you
need to download, and set the protocol to XMODEM.
Figure 203 Send file dialog box
Step 8: Click <Send>. The system displays the page, as shown in Figure 204.