3Com Switch 7750 Configuration Guide Guide

804 CHAPTER 76: DEVICE MANAGEMENT
Restarting the Ethernet
Switch
You can perform the following operation in user view when the switch is in
trouble or needs to be restarted.
n
When rebooting, the system checks whether there is any configuration change. If
there is, it prompts you to indicate whether or not to proceed. This prevents you
from losing your original configuration due to oblivion after system reboot.
Rebooting a Card of
Ethernet Switch
It would be necessary to reset a card of Ethernet switch when failure occurs.
The value of slot-number ranges with products:
■ Switch 7765: 0 to 3
■ Switch 7757: 0 to 6
■ Switch 7758: 0 to 7
The value 0 indicates to reset the Switch Fabric, equivalent to resetting the switch
system.
Scheduling a Reboot on
the Switch
After you schedule a reboot on the switch, the switch will reboot at the specified
time.
n
There is at most one minute defer for scheduled reboot, that is, the switch will
reboot within one minute after reaching the specified reboot date and time.
Specifying the APP to be
Adopted at Reboot
APP is the host software of the switch. If multiple APPs exist in the Flash memory,
you can use the command here to specify the one that will be adopted when the
switch reboots.
Perform the following configuration in user view:
Tabl e 616 Restart the Ethernet switch
Operation Command Description
Restart the Ethernet switch reboot -
Tabl e 617 Reset a card
Operation Command Description
Reset a card of Ethernet
switch
reboot [ slot slot-number ] Optional
Tabl e 618 Schedule a reboot on the switch
Operation Command Description
Schedule a reboot on the
switch, and set the reboot
date and time
schedule reboot at hh:mm [
yyyy/mm/dd ]
Optional
Schedule a reboot on the
switch, and set the reboot
waiting delay
schedule reboot delay {
hhh:mm | mmm }
Optional