3Com Switch 7750 Configuration Guide

IPX Configuration 141
to forward an IPX packet. A longer delay means slower forwarding whereas a
shorter delay means faster forwarding.
By importing routes, different routing protocols can share their routing
information. Note that IPX RIP imports only active static routes; inactive static
routes are neither imported nor forwarded.
Configuring IPX SAP Enabling IPX SAP
After IPX is enabled on VLAN interfaces, the system enables SAP automatically.
You can configure SAP parameters and service information as needed.
Configuring IPX SAP
In a large network, one IPX SAP broadcast consumes enormous bandwidth
resources. By configuring an appropriate SAP update interval, you can reduce the
bandwidth waste. Make sure that all servers and switches on the network have
the same SAP update interval to avoid the situation where the switches mistake an
operating server for a failed one.
The aging period of IPX SAP is a multiple of the IPX RIP update interval. You can
set multiple update intervals as an aging period.
Table 88 Configure IPX SAP
Operation Command Description
Enter system view system-view -
Enable IPX ipx enable Required
IPX is disabled by default
Enter VLAN interface view interface Vlan-interface
vlan-id
-
Configure an IPX network
number for the VLAN
interface
ipx network network Required
By default, the system does
not assign network numbers
to VLAN interface. That is,
IPX is disabled on all the
VLAN interfaces
Enable IPX SAP undo ipx sap disable Required
By default, SAP is enabled as
soon as IPX is enabled on
the VLAN interface
Table 89 Configure IPX SAP
Operation Command Description
Enter system view system-view -
Enable IPX ipx enable Required
IPX is disabled by default
Configure the update interval
of IPX SAP
ipx sap timer update seconds Optional
By default, the update
interval of IPX SAP is 60
seconds