3Com Switch 7750 Configuration Guide

Command Level/Command View 27
Layer 2 ACL
view
Define the
sub-rules of
Layer 2 ACLs,
which is
numbered
from 4,000 to
4,999.
[SW7750-acl-lin
k-4000]
Execute the acl
number 4000
command in
system view.
Execute the quit
command to return to
system view.
Execute the return
command to return to
user view.
User-define
d ACL view
Define the
sub-rules of
user-defined
ACLs, which
are in the
range of 5000
to 5999
[SW7750-acl-us
er-5000]
Execute the acl
number 5000
command in
system view
Execute the quit
command to return to
system view.
Execute the return
command to return to
user view.
Traffic-grou
p view
Configure
traffic group
parameters
[SW7750-traffic
-group-1]
Execute the
traffic-accountin
g traffic-group 1
command in
system view.
Execute the quit
command to return to
system view.
Execute the return
command to return to
user view.
QoS view Configure QoS
parameters
[SW7750-qoss-
GigabitEthernet
4/0/1]
or:
[SW7750-qosb-
GigabitEthernet
4/0/1]
Execute the qos
command in
Ethernet port view.
Execute the quit
command to return to
system view.
Execute the return
command to return to
user view.
QinQ view Create QinQ
instances and
configure
parameters for
QinQ
[SW7750-Gigabi
tEthernet4/0/1-v
id-1000]
Execute the
vlan-vpn vid 1000
uplink Ethernet
1/
0/5 untagged
command in
Ethernet port view.
Execute the quit
command to return to
system view.
Execute the return
command to return to
user view.
RADIUS
scheme view
Configure
RADIUS
parameters
[SW7750-radius
-1]
Execute the radius
scheme 1
command in
system view.
Execute the quit
command to return to
system view.
Execute the return
command to return to
user view.
HWTACACS
scheme view
Configure
parameters for
the
HWTACACS
protocol
[SW7750-hwtac
acs-1]
Execute the
hwtacacs scheme
1 command in
system view.
Execute the quit
command to return to
system view.
Execute the return
command to return to
user view.
ISP domain
view
Configure
parameters for
an ISP domain
[SW7750-isp-aa
bbcc.net]
Execute the
domain
aabbcc.net
command in
system view.
Execute the quit
command to return to
system view.
Execute the return
command to return to
user view.
Table 4 CLI views
View
Available
operation
Prompt
example Enter method Quit method